Top 5 Machinery Stocks To Watch For 2014

Asian stocks swung between gains and losses as Hong Kong�� benchmark index dropped ahead of a meeting of China�� top party officials this weekend. HSBC (5) Holdings Plc gained after Europe�� largest lender posted higher earnings.

Industrial & Commercial Bank of China Ltd. paced declines among mainland lenders listed in Hong Kong. Nissan Motor Co. (7201) sank 10 percent, the most since 2008, after the Japanese carmaker cut its profit forecast. Kubota Corp. (6326) rose 7.9 percent in Tokyo as the industrial-machinery maker reported profit that topped estimates. HSBC Holdings Plc added 1.7 percent in Hong Kong after third-quarter pretax profit increased 30 percent.

The MSCI Asia Pacific Index sank 0.1 percent to 140.98 as of 2:06 p.m. in Hong Kong after rising as much as 0.5 percent. Five stocks fell for every four that rose on the gauge. Hong Kong�� Hang Seng Index lost 0.4 percent. China�� leaders meet in Beijing Nov. 9-12 to map out a blueprint for reform as the world�� second-largest economy heads for its slowest growth in more than two decades.

Top Communications Equipment Companies To Buy For 2015: Cummins Inc.(CMI)

Cummins Inc. designs, manufactures, distributes, and services diesel and natural gas engines, electric power generation systems, and engine-related component products worldwide. It operates in four segments: Engine, Power Generation, Components, and Distribution. The Engine segment offers a range of diesel and natural gas powered engines under the Cummins and other customer brand names for the heavy-and medium-duty truck, bus, recreational vehicle, light-duty automotive, agricultural, construction, mining, marine, oil and gas, rail, and governmental equipment markets. This segment also provides new parts and service, as well as remanufactured parts and engines. The Power Generation segment offers power generation systems, components, and services, including diesel, natural gas, gasoline, and alternative-fuel electrical generator sets for use in recreational vehicles, commercial vehicles, recreational marine applications, and home stand-by or residential applications. This segment also provides components that make up power generation systems, such as engines, controls, alternators, transfer switches, and switchgears. The Components segment supplies filtration products, turbochargers, aftertreatment systems, intake and exhaust systems, and fuel systems for commercial diesel applications. This segment offers filtration and exhaust systems for on-and off-highway heavy-duty and mid-range equipment, as well as supplies filtration products for industrial and passenger car applications. This segment also develops after treatment and exhaust systems to help customers meet emissions standards and fuel systems. The Distribution segment provides parts and services, as well as service solutions, including maintenance contracts, engineering services, and integrated products. The company sells its products to original equipment manufacturers, distributors, and other customers. Cummins Inc. was founded in 1919 and is headquartered in Columbus, Indiana.

Advisors' Opinion:

• [By Peter Graham]

  The Q2 2014 earnings report for Navistar International Corp (NYSE: NAV), a potential peer of light, medium- and heavy-duty truck or engine makers PACCAR Inc (NASDAQ: PCAR) and Cummins Inc (NYSE: CMI), is scheduled to report earnings after the market closes on Thursday.�Aside from the Navistar International Corp earnings report, it should be said that PACCAR Inc and Cummins Inc both�reported Q1 2014 earnings on April 29th (PCAR reported higher revenues and net income�while CMI hit a�52-week high after a beat and raised guidance). However, Navistar International Corp�has lost market share since 2012 when�US regulators denied approval of a redesigned diesel engine that failed to reduce green house gas levels���forcing the company to turn to�rival Cummins Inc to supply engines as it develops its own catalytic reduction engines to reduce nitrogen oxide emissions.��

• [By Lauren Pollock]

  Among the companies with shares expected to actively trade in Tuesday’s session are Cummins Inc.(CMI), Actavis(ACT) PLC and Huntsman Corp.(HUN)

• [By Sara Murphy]

  C2ES sees combined heat and power (CHP) systems as key to promoting manufacturing growth while reducing emissions. CHP, or cogeneration, is the production of two kinds of energy -- usually electricity and heat -- from a single fuel. Natural gas or diesel drives these systems. When natural gas is used, efficiency is high and emissions low, making the technology extremely attractive. Cummins Power Generation, a division of Cummins (NYSE: CMI  ) , makes CHP systems from as small as 30 kilowatts to more than 100 megawatts. CHP remains expensive and faces regulatory hurdles, according to C2ES, and is still in its early stages of development, but it holds serious promise. Cummins notes that CHP can save its customers up to 35% on overall energy costs.

• [By Sean Williams]

  Second, fuel cost control has been crucial, and will remain a key component to Swift's success. Swift is handling its fuel costs this by maximizing the operating efficiency of its tractor and trailer fleet, and by partnering up with natural gas diesel engine manufacturer Cummins (NYSE: CMI  ) . The goal of this partnership is to develop natural gas engines that get comparable mileage to diesel at a cheaper cost, and when combined with increased CNG fueling stations around the U.S. operated by Clean Energy Fuels (NASDAQ: CLNE  ) , create a win-win scenario for all parties involved. To that end, Swift's fuel operating costs should drop, Cummins will have a steady stream of business, Clean Energy Fuels gets a large fueling customer under its belt that will help with building out its fuel station infrastructure, and the world gets fewer emissions from burning diesel.

Top 5 Machinery Stocks To Watch For 2014: EMS Seven Seas ASA (EMS)

EMS Seven Seas ASA, formerly known as Eitzen Maritime Services ASA, is a Norway-based company active in the shipping industry. It is operational through two divisions: Ship Management and Ship Supply, servicing clients within the military, merchant, fisheries, offshore and cruise market segments. The Ship Management (and Insurance) unit provides technical management, crewing, newbuilding and project consultancy services, ship agency services and marine insurance brokering. It has its main operations in the Baltic, Russia, India and Singapore. Ship Supply provides provisions, duty free products, stores, spares and marine products and equipment to the merchant marine, offshore, fishing fleet, military and cruise market. This segment operates in Norway, Germany, the Netherlands, Spain, the United Arab Emirates (UAE), Djibouti and Singapore. Eitzen Maritime Services ASA is active internationally through its subsidiaries. Advisors' Opinion:

• [By victorselva]

  In a macro view, revenues in the electronic equipment and instrument sub-industry will remain strong due to the rise in equipment and instrument manufacturers. Distributors, electronic manufacturing service (EMS) companies and original equipment manufacturers (OEM) are going to increase orders as the economy improves in the future. With this promising outlook, let's take a look at Gabelli麓s last trade and try to explain to investors the reasons of this appealing investment opportunity.

Top 5 Machinery Stocks To Watch For 2014: Barnes Group Inc (B)

Barnes Group Inc. is an international aerospace and industrial components manufacturer and logistics services company serving a range of end markets and customers. The products and services provided by Barnes Group are critical components for applications, which provide transportation, communication, manufacturing and technology. The Company operates under two global business segments: Logistics and Manufacturing Services, and Precision Components. On December 30, 2011, the Company sold its Barnes Distribution Europe (BDE) business to Berner SE. In August 2012, the Company acquired Synventive Molding Solutions.

Logistics and Manufacturing Services

Logistics and Manufacturing Services provides logistics support and repair services. Value-added logistics support services include inventory management, technical sales, and supply chain solutions for maintenance, repair, operating, and production supplies and services. Repair services provided include the manufacturing of spare parts for the refurbishment and repair of engineered components and assemblies for commercial and military aviation. Logistics and Manufacturing Services has sales, distribution, and manufacturing operations in the United States, Brazil, Canada, China, France, Mexico, Singapore, Spain and the United Kingdom. Products and services are available in more than 30 countries.

The global operations are engaged in supplying, servicing and manufacturing of maintenance, repair and operating components. Activities include logistics support through vendor-managed inventory and technical sales for stocked replacement parts and other products, catalog offerings and custom solutions, and the manufacture and delivery of aerospace aftermarket spare parts, including the revenue sharing programs (RSPs) under, which the Company receives right to supply designated aftermarket parts over the life of the related aircraft engine program, and component repairs. In addition, the manufacturing and supplying of aerospace! aftermarket spare parts, including the RSPs, are dependent upon the reliable and timely delivery of components.

Precision Components

Precision Components is a global supplier of engineered components for critical applications focused on providing solutions for a industrial, transportation and aerospace customer base. It is equipped to produce every type of precision spring, from fine hairsprings for electronics and instruments to heavy-duty springs for machinery, as well as precision-machined and fabricated components and assemblies for OEM turbine engine, airframe and industrial gas turbine builders globally, and the military. It is also a manufacturer and supplier of precision mechanical products, including precision mechanical springs, compressor reed valves and nitrogen gas products. Precision Components also manufactures punched and fine-blanked components used in transportation and industrial applications, nitrogen gas springs and manifold systems used to control stamping presses, and retention rings, which position parts on a shaft or other axis.

Precision Components has a customer base with products purchased by durable goods manufacturers located in industries, including transportation, consumer products, farm equipment, telecommunications, medical devices, home appliances and electronics, and airframe and gas turbine engine manufacturers for commercial and military jets, business jets, and land-based industrial gas turbines. Long-standing customer relationships enable Precision Components to participate in the design phase of components and assemblies, through which customers receive the benefits of manufacturing research, testing and evaluation. Products are sold through Precision Components��direct sales force and a distribution channel. Precision Components has manufacturing, sales, assembly and distribution operations in the United States, Brazil, Canada, China, Germany, Korea, Mexico, Singapore, Sweden, Switzerland, Thailand and the United Kingdo! m.

Advisors' Opinion:

• [By Rich Duprey]

  Citing the benefits of providing high-margin, low-cost consumables with a broad distribution footprint throughout the U.S. and Canada, industrial supplier MSC Industrial Direct (NYSE: MSM  ) announced today that it has completed the�acquisition of Barnes Group's (NYSE: B  ) �North American distribution business�for $550 million.

• [By Dave and Donald Moenning]

  For those investors that like the comfort generally provided by a diversified portfolio, here's an idea that will allow you to (a) maintain a diversified allocation in your portfolio and (b) stay out of trouble when the big, bad bears come to call on an asset class or two.

• [By Thomas Sobon]

  (6) Trend reversals are difficult to forecast in advance but they don't have to be. They occur when the trend lines as indicated by the moving averages are newly broken. In order for the reversal to be complete, all three of the moving averages have to be broken. Once broken, you either have a "durable" reversal or a "false" reversal. With lots of practice, you can learn how to (A) make decisions early in the reversal process and (B) distinguish between durable and false reversals.

Top 5 Machinery Stocks To Watch For 2014: IDEX Corp (IEX)

IDEX Corporation (IDEX), incorporated on September 24, 1987, is an applied solutions business that sells an array of pumps, flow meters and other fluidics systems and components and engineered products to customers in a variety of markets worldwide. All of the Company�� business activities are carried out through wholly owned subsidiaries. IDEX operates in three business segments: Fluid & Metering Technologies, Health & Science Technologies and Fire & Safety/Diversified Products. Reporting units in the Fluid & Metering Technologies segment consist of Banjo; Energy and Fuels (Energy); Chemical, Food & Process (CFP) and Water & Waste Water (Water). Reporting units in the Health & Science Technologies segment consist of IDEX Health & Science (IH&S); IDEX Optics and Photonics (IOP); Precision Polymer Engineering (PPE); Gast; Micropump and Materials Process Technologies (MPT). Reporting units in the Fire & Safety/Diversified Products segment consist of Fire Suppression; Rescue Tools and Band-It. In July 20, 2012, it acquired Matcon Group Limited. In March 2013, it announced the acquisition of FTL Seals Technology, Ltd. On April 11, 2012, the Company acquired the stock of PPC. On April 30, 2012, the Company acquired the stock of ERC.

Fluid & Metering Technologies Segment

The Fluid & Metering Technologies Segment designs, produces and distributes displacement pumps, flow meters, injectors, and other fluid-handling pump modules and systems and provides flow monitoring and other services for the water and wastewater industries. Fluid & Metering Technologies pump and metering solutions serve a range of end markets, including industrial infrastructure (fossil fuels, refined and alternative fuels, and water and wastewater), chemical processing, agricultural, food and beverage, pulp and paper, transportation, plastics and resins, electronics and electrical, construction and mining, pharmaceutical and bio-pharmaceutical, machinery and other markets. Fluid & Metering Technologies accounte! d for 43% of IDEX�� sales and 82% of IDEX�� operating income, with approximately 46% of its sales to customers outside the United States as of December 31, 2012, with approximately 46% of its sales to customers outside the United States. Banjo is a provider of pumps, valves, fittings and systems used in liquid handling. Banjo is based in Crawfordsville, Indiana and its products are used in agricultural and industrial applications. Approximately 11% of Banjo�� sales during 2012 were to customers outside the United States.

Energy consists of the Company�� Corken, Faure Herman, Liquid Controls, S.A.M.P.I. and Toptech businesses. Energy is a supplier of flow meters, electronic registration and control products, rotary vane and turbine pumps, reciprocating piston compressors, and terminal automation control systems. Energy has facilities in Longwood, Florida and Zwijndrech, Belgium (Toptech products), Oklahoma City, Oklahoma (Corken products), La Ferte Bernard, France (Faure Herman products), Vadodara, Gujarat, India (Liquid Controls products), and Altopascio, Italy (S.A.M.P.I. products). Applications for Liquid Controls and S.A.M.P.I. positive displacement flow meters, electronic, registration and control products include mobile and stationary metering installations for wholesale and retail distribution of petroleum and liquefied petroleum gas, aviation refueling, and industrial metering and dispensing of liquids and gases. Corken products consist of rotary vane pumps, single and multistage regenerative turbine pumps, and small horsepower reciprocating piston compressors. Toptech supplies terminal automation hardware and software to control and manage inventories, as well as transactional data and invoicing, to customers in the oil, gas and refined-fuels markets. Faure Herman is a supplier of ultrasonic and helical turbine flow meters used in the custody transfer and control of fluids and gases. Approximately 53% of Energy�� sales during 2012 were to customers outside the United State! s.

!

CFP consists of the Company�� Richter, Viking and Warren Rupp businesses. CFP is a producer of air-operated and motor-driven double-diaphragm pumps and replacement parts, lined pumps, valves and control equipment for the chemical, fine chemical and pharmaceutical industries, and external gear pumps. Richter�� corrosion resistant fluoroplastic lined products offer solutions for applications in the process industry. Viking�� products consist of external gear pumps, strainers and reducers, and related controls used for transferring and metering thin and viscous liquids sold under the Viking and Wright Flow brands and air-operated double-diaphragm pumps sold under the Blagdon brand. Markets served by Viking products include chemical, petroleum, pulp and paper, plastics, paints, inks, tanker trucks, compressor, construction, food and beverage, personal care, pharmaceutical and biotech. Warren Rupp products (which also include Pumper Parts and Versa-Matic products) are used for abrasive and semisolid materials, as well as for applications where product degradation is a concern or where electricity is not available or should not be used. Markets served by Warren Rupp products include chemical, paint, food processing, electronics, construction, utilities, mining and industrial maintenance. CFP maintains operations in Kampen, Germany (Richter products), Cedar Falls, Iowa (Richter and Viking products), Eastbourne, East Sussex, England, Shannon, Ireland (Viking products) and Mansfield, Ohio (Warren Rupp products). CFP primarily uses independent distributors to market and sell its products. Approximately 54% of CFP�� sales during 2012 were to customers outside the United States.

Water consists of the Company�� ADS, IETG, iPEK, Knight and Pulsafeeder businesses. Water is a provider of metering technology and flow monitoring products and underground surveillance services for water and wastewater markets, as well as a manufacturer of pumps and dispensing equipment for industrial laundries! , commerc! ial dishwashing and chemical metering, and a provider of metering pumps, special-purpose rotary pumps, peristaltic pumps, fully integrated pump and metering systems, custom chemical-feed systems, electronic controls and dispensing equipment. ADS�� products and services provide integrated solutions that enable industry, municipalities and government agencies to analyze and measure the capacity, quality and integrity of wastewater collection systems, including the maintenance and construction of such systems. IETG�� products and services enable water companies to manage their water distribution and sewerage networks, while its surveillance service specializes in underground asset detection and mapping for utilities and other private companies. iPEK supplies remote controlled systems used for infrastructure inspection. Knight is a manufacturer of pumps and dispensing equipment for industrial laundries, commercial dishwashing and chemical metering. Pulsafeeder products are used to introduce precise amounts of fluids into processes to manage water quality and chemical composition, as well as peristaltic pumps. Its markets include water and wastewater treatment, oil and gas, power generation, pulp and paper, chemical and hydrocarbon processing, and swimming pools. Water maintains operations in Huntsville, Alabama and various other locations in the United States, Sydney, New South Wales, Australia and Melbourne, Victoria, Australia (ADS products), Leeds, England (IETG products and services), Hirschegg, Austria, and Sulzberg, Germany (iPEK products), Lake Forest, California, Mississauga, Ontario, Canada, Eastbourne, East Sussex, England, Unanderra, Australia, and Ciudad Juarez, Chihuahua, Mexico (Knight products), Rochester, New York, Punta Gorda, Florida and Milan, Italy (Pulsafeeder products). Approximately 47% of Water�� sales during 2012 were to customers outside the United States.

Water Services & Technology (WST) consists of the Company�� ADS, IETG and iPEK businesses. WST is a provi! der of me! tering technology and flow monitoring products and underground surveillance services for wastewater markets. ADS�� products and services provide integrated solutions that enable industry, municipalities and government agencies to analyze and measure the capacity, quality and integrity of wastewater collection systems, including the maintenance and construction of such systems. IETG�� products and services enable water companies to manage their water distribution and sewerage networks, while its surveillance service specializes in underground asset detection and mapping for utilities and other private companies. iPEK supplies remote controlled systems used for infrastructure inspection. WST maintains operations in Huntsville, Alabama and various other locations in the United States and Australia (ADS products and services); Leeds, England (IETG products and services); and Hirschegg, Austria, and Sulzberg, Germany (iPEK products). Approximately 40% of WST�� 2012 sales were to customers outside the United States.

The Company competes with Pump Solutions Group, Dover Corporation, Milton Roy and Tuthill Corporation.

Health & Science Technologies Segment

The Health & Science Technologies Segment designs, produces and distributes a range of precision fluidics, rotary lobe pumps, centrifugal and positive displacement pumps, roll compaction and drying systems used in beverage, food processing, pharmaceutical and cosmetics, pneumatic components and sealing solutions, including pumping solutions required in analytical instrumentation, clinical diagnostics and drug discovery, molded and extruded, biocompatible medical devices and implantables, air compressors used in medical, dental and industrial applications, optical components and coatings for applications in the fields of scientific research, defense, aerospace, telecommunications and electronics manufacturing, laboratory and commercial equipment used in the production of micro and nano scale materials, precision pho! tonic sol! utions used in life sciences, research and defense markets, and precision gear and peristaltic pump technologies. The segment accounted for 35% of IDEX�� sales and 35% of operating income in 2012, with approximately 54% of its sales to customers outside the United States.

IH&S consists of Eastern Plastics, Rheodyne, Ismatec, Sapphire Engineering, Upchurch Scientific and ERC, which was acquired in April 2012. IH&S has facilities in Rohnert Park, California (Rheodyne products); Bristol, Connecticut (Eastern Plastics products); Wertheim-Mondfeld, Germany (Ismatec products); Middleboro, Massachusetts (Sapphire Engineering products); Oak Harbor, Washington (Ismatec and Upchurch Scientific products); and Kawaguchi, Japan (ERC products). Eastern Plastics products, which consist of high- precision integrated fluidics and associated engineered plastics solutions, are used in a set of end markets including medical diagnostics, analytical instrumentation, and laboratory automation. Rheodyne products consist of injectors, valves, fittings and accessories for the analytical instrumentation market. Rheodyne products are used by manufacturers of high pressure liquid chromatography equipment servicing the pharmaceutical, biotech, life science, food & beverage, and chemical markets. Ismatec products include peristaltic metering pumps, analytical process controllers, and sample preparation systems. Sapphire Engineering and Upchurch Scientific products consist of fluidic components and systems for the analytical, biotech and diagnostic instrumentation markets, such as fittings, precision-dispensing pumps and valves, tubing and integrated tubing assemblies, filter sensors and other micro-fluidic and nano-fluidic components, as well as advanced column hardware and accessories for the high performance liquid chromatography (HPLC) market. Sapphire Engineering and Upchurch Scientific products primarily serve the pharmaceutical, drug discovery, chemical, biochemical processing, genomics/proteomics research, envir! onmental ! labs, food/agriculture, medical lab, personal care, and plastics/polymer/rubber production markets. ERC manufactures gas liquid separations and detection solutions for the life science, analytical instrumentation and clinical chemistry markets. ERC�� products consist of in-line membrane vacuum degassing solutions, refractive index detectors and ozone generation systems. Approximately 52% of IH&S�� 2012 sales were to customers outside the United States.

IOP consists of CVI Melles Griot (CVI MG), Semrock and AT Films (the Precision Photonics portion of the AT Films business was acquired in April 2012). CVI MG is a into design and manufacture of precision photonic solutions used in the life sciences, research, semiconductor, security and defense markets. CVI MG�� products are focused on the generation, control and productive use of light for a variety of key science and industrial applications. Products consist of specialty lasers and light sources, electro-optical components, specialty shutters, opto-mechanical assemblies and components. In addition, CVI MG produces critical components for life science research, electronics manufacturing, military and other industrial applications including lenses, mirrors, filters and polarizers. These components are utilized in a number of applications such as spectroscopy, cytometry (cell counting), guidance systems for target designation, remote sensing, menology and optical lithography.

CVI MG is headquartered in Albuquerque, New Mexico, with additional manufacturing sites located in Carlsbad, California; Rochester, New York; Isle of Man, British Isles; Leicester, England; Kyongki-Do, Korea; Tokyo, Japan; Didam, The Netherlands; and Singapore. Semrock is a provider of optical filters for biotech and analytical instrumentation in the life sciences markets. Semrock�� optical filters are produced using state-of-the-art manufacturing processes which enable it to offer its customers improvements in instrument performance and reliability.! Semrock ! is located in Rochester, New York. AT Films specializes in optical components and coatings for applications in the fields of scientific research, defense, aerospace, telecommunications and electronics manufacturing. The Precision Photonics portion of its business specializes in optical components and coatings for applications in the fields of scientific research, aerospace, telecommunications and electronics manufacturing. AT Films is headquartered in Boulder, Colorado. Approximately 57% of IOP�� 2012 sales were to customers outside the United Sates.

Containment consists of Precision Polymer Engineering (PPE). PPE, which is located in Blackburn, England, is a provider of high performance seals and advanced sealing solutions for a diverse range of global industries and applications, including hazardous duty, analytical instrumentation, semiconductor/solar, process technologies, pharmaceutical, electronics, and food applications. Approximately 79% of PPE�� 2012 sales were to customers outside the United States.

Gast consists of the Company�� Gast and Jun-Air businesses. The Gast business is a manufacturer of air-moving products, including air motors, low-range and medium-range vacuum pumps, vacuum generators, regenerative blowers and fractional horsepower compressors. Gast products are used in a variety of long-life applications requiring a quiet, clean source of moderate vacuum or pressure. Gast products primarily serve the medical equipment, environmental equipment, computers and electronics, printing machinery, paint mixing machinery, packaging machinery, graphic arts, and industrial manufacturing markets. The Jun-Air business is a provider of low-decibel, ultra-quiet vacuum compressors suitable for medical, dental and laboratory applications. Based in Benton Harbor, Michigan, Gast also has a logistics and commercial center in Redditch, England. Approximately 27% of Gast�� 2012 sales were to customers outside the United States.

Micropump, headquartered i! n Vancouv! er, Washington, produces, precision-engineered, magnetically and electromagnetically driven rotary gear, piston and centrifugal pumps. Micropump products are used in low-flow abrasive and corrosive applications. Micropump products primarily serve the printing machinery, medical equipment, paints and inks, chemical processing, pharmaceutical, refining, laboratory, electronics, pulp and paper, water treatment, textiles, peristaltic metering pumps, analytical process controllers and sample preparation systems markets. Approximately 77% of Micropump�� 2012 sales were to customers outside the United States.

MPT consists of Quadro, Fitzpatrick, Microfluidics and Matcon Group Limited (Matcon), which was acquired in July 2012. Quadro is a provider of particle control solutions for the pharmaceutical and bio-pharmaceutical markets. Based in Waterloo, Ontario, Canada, Quadro�� activities include fine milling, emulsification and special handling of liquid and solid particulates for laboratory, pilot phase and production scale processing within the pharmaceutical and bio-pharmaceutical markets. Fitzpatrick is into the design and manufacture of process technologies for the pharmaceutical, food and personal care markets. Fitzpatrick designs and manufactures customized size reduction, roll compaction and drying systems to support their customers��product development and manufacturing processes. Fitzpatrick is headquartered in Elmhurst, Illinois. Microfluidics is into designing and manufacturing of laboratory and commercial equipment used in the production of micro and nano scale materials for the pharmaceutical and chemical markets. Microfluidics is the producer of the Microfluidizer family of high shear fluid processors for uniform particle size reduction, robust cell disruption and nanoparticle creation. Microfluidics has offices in Newton, Massachusetts. Matcon is into material processing solutions for high value powders used in the manufacture of pharmaceuticals, food, plastics, and fine chemic! als.

!

Matcon�� products consist of the original cone valve powder discharge system and filling, mixing and packaging systems, all of which support its customers��automation and process requirements. Matcon is located in Evesham, Worcestershire, England. Approximately 61% of MPT�� 2012 sales were to customers outside the United States.

The Company competes with Gardner Denver, Inc., Thermo Scientific Dionex, Gooch & Housego PLC, Parker Hannifin and Valco Instruments Co., Inc.

Fire & Safety/Diversified Products Segment

The Fire & Safety/Diversified Products segment produces firefighting pumps and controls, rescue tools, lifting bags and other components and systems for the fire and rescue industry, engineered stainless steel banding and clamping devices used in a variety of industrial and commercial applications, and precision equipment for dispensing, metering and mixing colorants and paints used in a variety of retail and commercial businesses around the world. The segment accounted for 22% of IDEX�� sales and 53% of IDEX�� operating income in 2012, with approximately 56% of its sales to customers outside the United States.

Fire Suppression consists of the Company�� Class I, Hale and Godiva businesses, which produce truck-mounted and portable fire pumps, stainless steel valves, foam and compressed air foam systems, pump modules and pump kits, electronic controls and information systems, conventional and networked electrical systems, and mechanical components for the fire, rescue and specialty vehicle markets. Fire Suppression�� customers are primarily OEMs. Fire Suppression is headquartered in Ocala, Florida (Class 1 and Hale products), with additional facilities located in Warwick, England (Godiva products). Approximately 41% of Fire Suppression�� 2012 sales were to customers outside the United States.

Rescue consists of the Company�� Dinglee, Hurst Jaws of Life, Lukas and Vetter businesses, which produce hydraulic! , battery! , gas and electric-operated rescue equipment, hydraulic re-railing equipment, hydraulic tools for industrial applications, recycling cutters, pneumatic lifting and sealing bags for vehicle and aircraft rescue, environmental protection and disaster control, and shoring equipment for vehicular or structural collapse. Rescue Tool�� customers are primarily public and private fire and rescue organizations. Rescue has facilities in Shelby, North Carolina (Hurst Jaws of Life products); Tianjin, China (Dinglee products); Erlangen, Germany (Lukas products); and Zulpich, Germany (Vetter products). Approximately 75% of Rescue�� 2012 sales were to customers outside the United States.

Band-It is a producer of stainless steel banding, buckles and clamping systems. Band-It products are used for securing exhaust system heat and sound shields, industrial hose fittings, traffic signs and signals, electrical cable shielding, identification and bundling, and in numerous other industrial and commercial applications. Band-It products primarily serve the automotive, transportation equipment, oil and gas, general industrial maintenance, electronics, electrical, communications, aerospace, utility, municipal and subsea marine markets. Band-It is based in Denver, Colorado, with additional operations in Staveley, Derbyshire, England, and a IDEX shared manufacturing facility in China. Approximately 39% of Band-It�� 2012 sales were to customers outside the United States.

Dispensing Equipment produces precision equipment for dispensing, metering and mixing colorants and paints used in a variety of retail and commercial businesses worldwide. Dispensing Equipment is a global supplier of precision-designed tinting, mixing, dispensing and measuring equipment for auto refinishing and architectural paints. Dispensing Equipment products are used in retail and commercial stores, hardware stores, home centers, department stores, automotive body shops as well as point-of-purchase dispensers. Dispensing Equipmen! t is head! quartered in Wheeling, Illinois with additional facilities in Sassenheim, The Netherlands; Unanderra, Australia; and Milan, Italy, as well as IDEX shared manufacturing facilities in India and China. Approximately 59% of Dispensing Equipment�� 2012 sales were to customers outside the United States.

The Company competes with American Cast Iron Pipe Company, Holmatro, Inc., Nordic Capital and Panduit Corporation.

Advisors' Opinion:

• [By Marc Bastow]

  This week’s biggest increase came from applied solutions provider Idex (IEX), which �raised its quarterly dividend 22% to 23 cents per share payable April 30 to shareholders of record April 16.
  IEX Dividend Yield: 1.60%